Inverter Integration Guide - Phocos Any-Grid
The 48 VNOM Blue Ion 2.0 battery is designed to be compatible with the majority of charge controllers and inverters that work with traditional lead acid batteries.
By setting the bulk, absorb, float, and equalize set points to these values, we are overriding the logic of the chargers to allow the full power of the charging source to be applied to the Battery Management Unit. In this way, the Battery Management Unit is monitoring each battery module for current, temperature, and voltage precisely balancing each cell in every module. When the battery modules have reached the recommended highest voltage of 55.2 VDC and an associated 100% State of Charge, the programming of the charging set points simply turns the charging source off.
The settings in this application note are meant to better match the performance of the Blue Ion 2.0 Energy Storage System to the capabilities of the Phocos inverter/charger and maximize the usable system performance. Each project has its own variables that must be accounted for when setting inverter parameters. Carefully review these settings, they can be changed to optimize the performance of your particular system.
Please contact Blue Planet Energy support at http://support.blueplanetenergy.com/ for further assistance.
Related Articles
Inverter Integration Guide - SMA Sunny Island
Blue Ion 2.0 Operational Settings for SMA Sunny Island Introduction The 48 VNOM Blue Ion 2.0 battery is designed to be compatible with the majority of charge controllers and inverters that work with traditional lead acid batteries. By setting the ...Inverter/Charger Integration Guide
The 48 VNOM Blue Ion Energy Storage System (ESS) is designed to be compatible with the majority of charge controllers and inverters that work with traditional lead acid batteries. When operating in an open loop scenario (no communication between the ...Namaka Outback Integration Guide
Use this guide when integrating Nāmaka with Outback inverters and communication portals. Integrating Nāmaka will display Outback inverter data on the Nāmaka website.Namaka Schneider Integration Guide
Use this guide when integrating Nāmaka with Schneider inverters and communication portals (InsightFacility, InsightHome and the legacy Gateway). Nāmaka facilitates direct communication between the Blue Ion and the Schneider XW Pro and will display ...Namaka Sol-Ark Integration Guide
Namaka Sol-Ark Integration Guide Use this guide when integrating Nāmaka with Sol-Ark inverters. Nāmaka facilitates direct communication between Blue Ion and the Sol-Ark and will display inverter data on the Nāmaka website.